Tech Tip - Security

One of the most common problems we find with no start situations and security issues is the battery in the key fob going dead.  If you find yourself in a situation where you have your key fob on you and your security is still going off and will not let you start the motorcycle, it is very likely the battery in your fob is dead.  It is very easy to replace the battery.  But it is also important to know how to disarm your bike’s security manually.

1. Set the engine to the OFF position
2. Turn the ignition to the IGN position
3. Turn the ignition to the ACC position
4. Hold both turn switches in until confirmation (the security lamp will flash at a fast rate. The system is now ready for the PIN entry)
5. Enter the first digit of the code by repeatedly pressing the left turn signal
6. Once entered press the right turn signal 1 time
7. Enter the second digit of the code by repeatedly pressing the left turn signal
8. Once entered press the right turn signal 1 time
9. Enter the third digit of the code by repeatedly pressing the left turn signal
10. Once entered press the right turn signal 1 time
11. Enter the fourth digit of the code by repeatedly pressing the left turn signal
12. Once entered press the right turn signal 1 time
13. Enter the fifth digit of the code by repeatedly pressing the left turn signal (the security is now disarmed if entered correctly. You can now start your bike or enter a new code)
14. Once entered press the right turn signal 1 time (the security lamps will stop flashing if entered correctly)

To learn your Security code, please view your Owner’s Manual or contact our Service Department. & remember this is something that we cover in our FREE Monthly Service Seminars. The next seminar is scheduled for Wednesday, January 26th at 6pm...We look forward to seeing you there.

Tony D. & The Wild Fire Service Team